How to get rid of the smell in a front-load washer
October 24, 2026 · Easy · 60 min hands-on · 5 min read
Front-load washers trap moisture behind their rubber door gasket far more than top-loaders do, and that warm, damp, sealed environment is exactly what mold and mildew need. Add detergent and fabric softener residue building up in the drum and dispenser, and the smell is really a maintenance issue, not a defect — one a monthly routine clears up completely.
What you'll need
A washer-cleaning tablet (affresh or similar) or 1–2 cups of bleach, whichever your manual allows
Disinfecting wipes or a damp cloth
An old toothbrush for the dispenser tray
Warm water
The method
0 of 6 steps checked off0%
Do
✓Run a cleaning cycle about once a month, or after every 30 loads
✓Leave the door ajar between washes, always — this single habit prevents most odor before it starts
✓Wipe the gasket dry after any load with a lot of water (towels, bedding)
Don't
✕Don’t leave wet laundry sitting in the drum after a cycle finishes
✕Don’t use more detergent or fabric softener than the load actually needs — excess residue is a major cause of buildup
✕Don’t assume a bad smell means the machine is broken before trying a proper clean cycle
Common mistakes
!Closing the door right after unloading, which traps the exact moisture that causes the problem
!Overdosing detergent because "more is cleaner" — it isn’t, and it builds up in the drum and gasket fold
!Only ever wiping the visible gasket and never pulling back the rubber lip where mildew actually hides
Pro tip
If the smell comes back fast even with a monthly clean cycle, check that you’re using the right amount of a high-efficiency detergent — regular detergent in an HE machine creates far more residue and suds than the lower water volume can rinse away.