How to remove hard water stains from glass shower doors
October 24, 2026 · Easy · 25 min hands-on · 5 min read
Photo: Clearing hard-water film off a glass shower door
Those cloudy white patches on a glass shower door are mineral deposits left behind as hard water evaporates, and wiping them with a regular glass cleaner barely touches them — the minerals need something acidic to actually dissolve, plus a few minutes to work.
What you'll need
White vinegar
A spray bottle (or a microwave-safe measuring cup)
Baking soda
A non-scratch scrub sponge
A microfiber cloth
A squeegee, for upkeep
The method
0 of 5 steps checked off0%
Do
✓Squeegee the glass after every shower — three or four passes, about 20 seconds total
✓Crack a window or run the bathroom fan during and after showers to cut down on standing moisture
✓Treat stains while they’re light; heavy, long-set buildup takes longer to dissolve
Don't
✕Don’t use an abrasive scrubber or anything with grit — it can scratch glass while you’re trying to clean it
✕Don’t skip the dwell time and go straight to scrubbing
✕Don’t let the door air-dry after cleaning — that’s how the cycle restarts
Common mistakes
!Scrubbing hard right away instead of letting the vinegar sit — more elbow grease isn’t a substitute for the 15 minutes of chemical dwell time
!Using a glass cleaner that’s not acidic, which cleans surface grime but leaves the mineral deposits untouched
!Skipping the squeegee habit, which is what actually prevents the stains from building back up
Pro tip
A $10 squeegee on a suction hook by the shower is the single highest-value habit here — it takes about 20 seconds after each shower and is the difference between doing this whole process every week versus every few months.